HMT - IP Engines for Genset and Industrial Applications

Home > Products > IP Engines

HMT IP Engines

HMT Engines for Genset and Industrail Applications

Low Noise Level
Low Maintenance Cost
Compact and Vibration Free
Reliable and Easy Serviceability

MODEL

Specification	2502	3502	4902	6502
TYPE	Direct fuel injection, Four stroke, Water cooled diesel engine.
No. of Cylinders	2	3	3	4
Bore/Stroke (mm)	95/110	95/110	102/110	102/110
Swept Volume (cc)	1560	2340	2693	3597
Compression Ratio	17.4:1	17.4:1	17.4:1	17.4:1
H.P. Range	25	39 (SAE)	50	65 (SAE)
Fuel Injection Pump	MICO inline	MICO inline	MICO inline	MICO inline
Governor	Mechanical	Mechanical	Mechanical	Mechanical
Nozzle	MICO, Multi Hole	MICO, Multi Hole	MICO, Multi Hole	MICO, Multi Hole
Direction of Rotation	Clockwise when seen from fan end
Weight (Kg)- Approx.	340	390	390	440
Power @ 1500rpm (SAE)	18.6	30.3	43.9	49.8
*SFC, gms/ps/hr	180	170	165	160
Engine Sump (Litres)	5	8	9	12
Cooling System (Litres)	7.5	8.5	8.5	13
Starting	Self Start	Self Start	Self Start	Self Start
Dimension (L x H x W) mm	850x1670x920	990x1670x920	1170x1670x920	1310x1670x920
BIS Certified	Yes	Yes	-	-

STANDARD ACCESSORIES

Mounting brackets for floor mountings, Water cooling arrangement with Radiator, Fan, Water Pump and Thermo regulator, Air Cleaner, Silencer, Flywheel Assembly, Fuel & Lubricant Oil Filters, Lubricant Oil Pressure and Water Temperature Gauges, Alternator, Starter Motor, Transmission Elbow, Radiator Guard, Flywheel Guard, Hour Meter.

OPTIONAL ACCESSORIES

Auto-cut off on low lubricant Oil pressure and high water temperature with or without hooter.

Under standard test Conditioins with tolerance of +5gms/ps/hr

NOTE

Specifications are subject to modification and improvement without prior notice.
Photograph shown is only representative of HMT range of Engines and accessories may not be part of the standard equipment.

.:. Top