|
Model: 7511 HMT Tractor 7511 |
 |
|
SPECIFICATION |
|
|
ENGINE |
|
|
Make |
4R 1040 KOEL |
|
Type |
Diesel 4 Stroke, Direct injection, Water Cooled |
|
No. OF Cylinders |
4 |
|
H.P. Range |
75 H.P. Category |
|
Bore/Stroke |
105 mm / 120 mm |
|
Displacement Volume |
4160 CC |
|
Compression Ratio |
17:1 |
|
Rated RPM |
2200 RPM |
|
Air Cleaner |
Two stage filtration, oil bath with pre-cleaner |
|
Cooling System |
Forced water circulation type, with thermostatic control |
|
Clutch |
Dual, Dry friction plates, 1st for tractor travel, 2nd for P.T.O. shaft drive independently |
|
TRANSMISSION |
|
|
No. of Speeds |
8 forward + 2 reverse |
|
Forward |
(With rear tyres size (18.4 / 15-30) |
|
High: |
Low: |
|
H1 : 6.7 km/hr |
L1 : 1.97 km/hr |
|
H2 : 10.6 km/hr |
L2 : 3.1 km/hr |
|
H3 : 17.4 km/hr |
L3 : 5.1 km/hr |
|
H4 : 29.1 km/hr |
L4 : 8.6 km/hr |
|
R : 12.8 km/hr |
R : 3.8 km/hr |
|
STEERING |
Hydrostatic Power Steering |
|
DIFFERENTIAL LOCK |
Foot operated |
|
BRAKES |
|
|
Foot Brake |
Hydraulic, Internal expanding shoe type, with a system of individual wheel braking |
|
Parking Brake |
Hand-operated, Mechanical, Contracting band type |
|
P.T.O. Shaft Operation |
Independent Standard rpm 540 at 2000 engine rpm. Ground P.T.O. rpm 305.9 to 1331.6 available through gearbox. |
|
HYDRAULIC POWERLIFT SYSTEM |
|
|
Zetormatic hydraulic system with automatic Draft, Position and Mixed Control. Provision for external circuit for double acting cylinders. Hyd. gear pump output 20 litres/minute at 120 kg/cm2 pressure. Lift working pressure 150+10 kg/cm2. Lifting force at link ends 2000 kg. |
|
|
ELECTIRCAL SYSTEM |
|
|
Two nos. Storage battery 12 volts-88 Ah each. Self - starter Motor, Alternator for battery charging. |
|
|
CAPACITIES |
|
|
Fuel Tank |
80.0 litres |
|
Engine Sump |
11.5 litres |
|
Air Cleaner |
1.75 litre |
|
Gear Box |
25 litres |
|
Hydraulic Steering |
2.5 litres |
|
Portals (Each) |
1.9 litres |
|
F.I. Pump |
0.3 litre |
|
TYRES |
|
|
Front |
6.50-20 |
|
Rear |
18.4 / 15-30 |
|
DIMENSION |
|
|
Length |
3950 mm |
|
Width |
1960 mm |
|
Wheel base |
2350 mm |
|
Overall height upto Steering wheel |
2670 mm |
|
Height of Drawbar |
535 mm |
|
Ground clearance |
480mm |
|
Min. turning radius |
3600 mm + 200mm (with braking one wheel) |
|
Weight |
|
|
With Std. ballast |
3300 kg |
|
With full ballast |
4104kg |
|
STANDARD ACCESSORIES |
|
|
Set of Service Tools, Swinging Drawbar, Tool Box, Engine Hour Meter, Front Toe Hook, Trailer Coupling, Deluxe seat, Blinkers and Plough Lamp, Rear Wheel Ballast Weight, Roll over protection structure & Ampere meter. |
|
SPECIAL FEATURES:
-
AUTOMATIC HYDRAULIC CONTROL SYSTEMS
In addition to Position and Draft Controls, HMT tractors have a unique Mixed Control with which a uniform depth in ploughing can be maintained. -
HYDRAULIC BRAKES
Which can stop the tractors instantly and hence provide greater safety particularly when going up or down inclines. -
DUAL CLUTCH
A useful facility with which P.T.O.driven implements can be operated more efficiently. Hand Operated declutching of P.T.O. for short period also provided. -
HYDROSTATIC STEERING SYSTEM
Provided with Hydrostatic steering which is very convenient to operate and easy manoeuvrability. -
POWERFUL ENGINE
A tough engine which gives trouble-free performance for years. -
LUBRICATION
More efficient lubrication with oil cooling system. Pressure type circulation with replaceable oil filter cartridge.
Note: Specifications are subject to modifications and improvement without any notice.